Workcise App. How to use the Toiro function
Connect to toiro
*QR code location
1 Press the “Toiro” button.
Connect via 2 "QR code" or 3 "Connection history".
When connecting with 2:
Hold the camera over the QR code sticker on the desk top.
When connecting with 3:
From the displayed past connection history (up to three), select the number that matches the QR code sticker on the Toyro you want to connect to.
Controlling toiro
Adjust the height of the tabletop
If you want to raise it:
Press and hold button 4 until it reaches the desired height.
If you want to lower it:
Press and hold button 6 until it reaches the desired height.
If you want to automatically adjust to the recommended standing height:
Press button
5.
The recommended standing height is calculated based on your height registered in your personal data, and the height of the tabletop is automatically adjusted. You can stop the adjustment midway by pressing the "Stop" button.
Using the Alert Function
Press button 7 , check the disclaimer, and select "Agree."
When the 7 is orange, the setting is enabled, and when it is white, it is disabled.
What is the alert function?
This function will display a pop-up message on your smartphone if you have been sitting for one hour, and after two hours the tabletop will automatically vibrate tolet you know that you have been sitting for a long time.
Please check the disclaimer before using the function.
Caution regarding posture detection function
-Please note that there is a limit to the accuracy of posture detection.
・If the desk surface height is 90cm or more, it will be determined to be a "standing position."
Using the timer function
8 Press the button to proceed to the next screen.
Use dial 9 to set the desired time for the top to vibrate.
10Check the disclaimer and select "Agree" if you wish to use the function.
If you do not wish to use the service, select "Do not agree" and return to the previous screen.
the 8 is orange, the setting is enabled, and when it is white, it is disabled.When
The timer function...
A function that allows you to set off a vibration alert on the tabletop at any time.
You can freely set the timing for when you want to be reminded, such as 10 minutes before the end of a meeting or at the end of a focused desk session.
There may be a time difference of several minutes depending on the communication environment.
Please check the disclaimer before using the function.
Disconnect from toiro
11 Press the button.
While you are connected, other users cannot connect to the same Toylo and use it.
Please disconnect before using.
About Bluetooth communication
- Bluetooth wireless technology can connect at distances of up to approximately 10 m, but obstacles and radio wave conditions may shorten the communication distance or make communication impossible.
- Since Bluetooth devices and wireless LAN (IEEE802.11g/b) use the same frequency band (2.4 GHz), using them near a wireless LAN device may cause radio interference, resulting in a slower communication speed or even an inability to communicate.
- The Bluetooth adapter used in the Workcise app supports security technology that complies with the Bluetooth standard. However, we cannot take any responsibility for any information leakage that occurs when connecting using Bluetooth wireless technology.
Please be forewarned.
